|
Overview
The Quikscribe Recorder can easily send files across the Internet
via E-mail providing you are using a MAPI compliant e-mail client
installed e,e.g. MS Outlook or Outlook Express. But before this
can happen, Quikscribe needs to be properly setup and configured.
To do so,
do the following.
1. Click on
the File Menu
2. Click on
New Audio
3. Click on
Create (this will create a new audio file)
4. Click on
File Menu
5. Click on
the Send Audio
6. Under the
"Method Tab" make sure Email is selected
7. Next, double
click in the empty list box below.
8. Enter the
e-mail address you would like to add.
9. Then select
Add and then OK
Note: Before
sending an audio file via e-mail it is highly recommended that
your audio file is compressed. Otherwise it will take ten (10)
times longer to send the audio file and ten (10) times longer
for your recipient to receive the file. To enable audio compression
make sure you have either "Real Time Compression" or
"Post Compression" set under the File Management Tab
under the Settings Icon.
Note: If you
are having problems sending audio files via E-mail with Quikscribe,
do the following:
1. Create
a directory within your QS file directory titled Email
2. Create
a LAN send path to this directory in your Quikscribe Recorder
3. Send all
files you wish to E-mail to this directory
4. Using your
existing E-mail package, manually attach and send your audio files
from this directory
|
